Verification: 937b329de42152d7
Showing posts with label pocket milling. Show all posts
Showing posts with label pocket milling. Show all posts

Friday, December 7, 2018

Nice pocket mill, DMG DMU 80T

The only thing this week, I did some milling in the DMU80T
Programmed in the Millplus IT v520 in IPP mode (mostly)
Made a video of it :)
The sound is 10 seconds to late, doesn't matter much, it's a cool video.
Check me out, laid back, drinking coffee in right on the video at 0.28-ish, no stress there at all.
Spindle speed 5000 rpm (S5000)
Table Feed is 1000 mm/min (the metric stuff, fast as...) You inch guy, count to get the real feed.. one inch is 25.4 mm (got to be 39.3 inch a minute? (inch/min?) )
I think the feed is to high, but it works on a single piece...
Oooh forgot, I use a 10 mm cabide endmill, the workpiece is in brass.



Have a nice weekend :)
/T